Extruded D Fender

Extruded D fenders are suitable for frame dock, tugs, and other workboats; Smaller bottom width, Easy for installation and maintenance. Extruded fenders are available in many other sections as well
Description

Extruded D fenders are simple rubber profiles, usually bolted to the structure. Extrusion molding can be made to virtually any length and then cut and drilled according to the requirements of each application.

Extruded D fenders are suitable for frame dock, tugs, and other workboats; Smaller bottom width, Easy for installation and maintenance. Extruded D fenders are available in many other sections as well.

 

 

Features of D Fender:

 

- Reasonable reaction force and higher energy absorption

- Easy to install

- Suitable for frame type wharf, or protection of vessel
 

 

Dimensions: (mm)





   
Type Specification
H B L holes Q C h D d
D150x150x1000 150 150 1000 3 350 150 25 40 24
D200x200x1000 200 200 1000 3 353 150 35 55 30
D200x200x3000 200 200 3000 8 400 100 35 55 30
D250x250x1000 250 250 1000 3 350 150 35 60 30
D250x250x3000 250 250 3000 8 400 100 35 60 30
D300x300x1000 300 300 1000 3 350 150 40 65 32
D300x300x3000 300 300 3000 8 400 100 40 65 32
D300x360x1000 300 360 1000 3 350 150 40 65 32
D300x360x3000 300 360 3000 8 400 100 40 65 40
D400x400x1000 400 400 1000 3 400 150 55 80 32
D400x400x3000 400 400 3000 8 400 100 55 80 40
D500x500x1000 500 500 1000 3 350 150 90 97 45
D500x500x3000 500 500 3000 8 400 100 90 97 45
 
 

Products Photos:



Injection type d fender

                                                                                     (Injection type, SBR)



Extruded Type D Fender

                                                         (Extruded Type, EPDM)