Hall Anchor

Hall Anchor

  • Type: A widely used stockless Anchor
  • Weight: 40kg to 46000kg
  • Material: ZG200-400
  • Finishing: black tarred painting, hot dip galvanized
  • Certificate: DNV, ABS, LRS, BV, LR, etc.

Hall anchor is a typical and widely used stockless anchor. The shank is forged steel, and the crown that holds the two flukes together is cast steel. The hall anchor weight ranges from 40kg to 46000kg. The surface is treated with black tarred painting and hot-dip galvanized.

During assembly, the anchor is passed from bottom to top through the crown until the anchor shank at the lower end is close to the pit of the crown. Then two bolts are inserted into the crown to prevent the anchor shank from coming out. In this way, the anchor flukes can turn relative to the anchor shank.

Hall anchors are not only manufactured for easy assembly, its biggest advantage is that there is no anchor rod for convenient storage. When lifting, the anchor shank could be collected into the hawse pipe and the anchor is often in the state of throwing. The holding weight of the Hall anchor is relatively small, about 2.5 ~ 4. But because it is convenient, saving time and effort, its two flukes could dig into the bottom of the water, will not cause harm to ships, so it is widely used in various ships, as the main anchor.

As a leading supplier of marine anchors, Boomarine can supply a variety of anchors for different applications. Our hall anchors are normally supplied with certification and these can be from any of the major classification societies. Besides, we can also help you to find suitable chains and fittings, please feel free to contact us.

Features of Hall Anchor:

  • Comply with GB/T 546-1997 standard.
  • Two flukes can dig into the bottom of the water without harm to ships.
  • No anchor rod for convenient storage.
  • The traditional design makes a stable working performance.
  • Made of high-quality marine cast steel ZG200-400, extremely tough.

There are A/B/C types of Hall anchors that differ by the length and shape of the shank cross-section (rectangle, circular, shortened rectangular cross-section).

  • Hall Anchor Type A – Rectangular cross-section of the shank. The most commonly used conventional stockless anchor.
  • Hall Anchor Type B – Circular cross-section of the shank. Mainly used for bower anchor.
  • Hall Anchor Type C – Shortened rectangular cross-section of the shank. It also has a smaller swing angle compared to other hall anchor types.

Specifications of Hall Anchor:

Hall Anchor

Nominal Weight(kg)

L

L1

L2

H

H1

B1

40

430

303

557

67

303

198

60

492

347

637

76

347

227

100

540

378

750

91

395

230

125

580

405

810

97

425

248

150

612

432

855

104

452

264

180

650

459

910

111

480

280

240

720

510

1010

122

530

310

280

760

534

1060

130

560

325

300

770

540

1080

131

570

331

320

790

560

1100

132

580

338

360

820

580

1150

139

610

353

420

860

610

1200

146

640

370

480

900

640

1260

153

670

387

570

1042

732

1355

161

732

481

660

1096

769

1422

169

769

506

780

1170

820

1506

180

820

540

900

1220

855

1580

188

855

560

1020

1260

885

1645

194

885

580

1140

1319

916

1705

206

926

605

1290

1378

965

1778

211

965

630

2100

1651

1120

2093

245

1120

732

2850

1890

1253

2318

271

1253

822

3540

2032

1345

2480

294

1345

880

4320

2171

1435

2695

316

1435

943

4890

2263

1498

2769

329

1498

984

5000

2317

1510

2800

332

1510

992

6450

2340

1644

3037

361

1644

1080

7800

2493

1750

3235

385

1750

1152

8500

2565

1800

3355

395

1800

1184

10500

2752

1934

3571

425

1934

1273

12900

2947

2072

3824

455

2072

1363

13500

2992

2104

3882

462

2104

1384

14700

3078

2165

3994

476

2165

1424

16900

3225

2268

4184

498

2268

1492

23000

3573

2514

4631

551

2514

1654

35500

4132

2903

5363

637

2903

1906

46000

4505

3165

5847

695

3165

2078

Products Photo

Hall Anchor

Recommended Products