Arch Fender

Arch fenders could be used as a single element also can mount the UHMW-PE face pad as a system.  It has a bigger compression ratio, higher energy absorption, and lower reaction force.
Description
Arch fenders are simple and rugged, providing reliable and trouble-free service for a wide variety of berths even under the most severe conditions. Boomarine supplied rubber fenders are manufactured from high-quality nature rubber and another styrene Butadiene SBR based compounds to satisfy various performance requirements. Our rubber fenders are widely used domestically yet delivered worldwide like Europe, Africa, Southeast Asia, the middle east, etc.
 

Compared with traditional V type fender, arch fender has the following Features:


1. Has a bigger compression ratio, higher energy absorption, and lower reaction force.
2. Easy to install.
3. UHMW-PE pad could be installed at the top of the fenders, 
it will reduce hull pressure and vessel friction factor so as to lessen shear force during vessel berthing.


 

Arch Fender's Main Applications:


- RoRo Berths
- General Cargo
- Workboat Harbors
- Barge and Tug Berths

 

Arch Fenders are divided into three types:
 

Type A is without pad. The UHMW-PE pad could be mounted with bolts (type B) or cohere to the top of the fender directly (type C).

Type B fender is to install a pre-built-in steel plate at the top part of the fender, it can be connected with a face pad directly or connect with the front panel coved with face pad, so as to reduce the friction coefficient between ships and fenders and prolong the fender service life. There are three structure forms: two bevel ends, two straight ends, one bevel end and one straight end.

Type C fender is produced by the adoption of advanced material and procedure to cohere 20-30 thickness  UHMW pad directly to the fender which maintains A fender performance so as to reduce the friction coefficient of fender against ships and also reduce project cost.




                                   (type B)                                                                                        (Type C)
 




Finished Arch Fenders with PE pad (Type B)


Finished Arch Fenders with PE pad

 

Dimensions (mm)

(For more dimensions, performances, and fixings, please download the FDF at the top of this page.)




 
Type                                              Dimensions
 H  L   L1  C   Q    n   B   B1 B2   B3   h a  b e f
A150x1000 150 1000 1075 110 855 2 98 240 300 96 22.5 50 95 25 55
A150x1500 150 1500 1575 112.5 675 3 98 240 300 96 22.5 50 95 25 55
A150x2000 150 2000 2075 215 620 4 98 240 300 96 22.5 50 95 25 55
A150x2500 150 2500 2575 220 785 4 98 240 300 96 22.5 50 95 25 55
A150x3000 150 3000 3075 215 715 5 98 240 300 96 22.5 50 95 25 55
A150x3500 150 3500 3575 220 671 6 98 240 300 96 22.5 50 95 25 55
A200x1000 200 1000 1100 120 860 1 145 320 400 128 30 58 105 29 75
A200x1500 200 1500 1600 120 680 2 145 320 400 128 30 58 105 29 75
A200x2000 200 2000 2100 120 620 3 145 320 400 128 30 58 105 29 75
A200x2500 200 2500 2600 122.5 785 3 145 320 400 128 30 58 105 29 75